FastRack: String Inverter Mount
Sollega Inverter Mount Unattached Mount Detail Stamped
Stamped engineering detailPDF document
Stamped engineering detail for the ballast-only (unattached) configuration of the Sollega String Inverter Mount, showing the FR510 base ballasted with (4) 32.5 lb blocks per FastRack510, the rail-to-L-bracket connection, and single, two, and three-inverter assembly layouts.
Sollega String Inverter Mount — Unattached Mount Detail
Stamped detail drawing for the ballast-only (unattached) configuration. The inverter sits on aluminum rails over the FR510 base, held down with ballast blocks and no roof penetration. Includes side and front assembly views and the rail-to-L-bracket connection.
Ballasted Inverter Mount — Side
- Components: string inverter, aluminum rail, Sollega FR510 base
- Center of mass (C.O.M.) of inverter shall be placed directly over the center of the ballast blocks
- (4) 32.5 lb. ballast blocks (4 x 8 x 16") in each FastRack510
Rail / L-Bracket Connection
- Aluminum L-brackets connect the inverter to the aluminum rail
- Stainless steel 5/16" T-bolt and serrated flange nut
Assembly Configurations
- Full 3-inverter assembly (front)
- Full 2-inverter assembly (front)
- Full single-inverter assembly (front)
Each FastRack510 base is ballasted with (4) 32.5 lb. ballast blocks (4 x 8 x 16"). Space inverters per manufacturer's recommended distance. PE stamped.
Get the original document
Download the source PDF document or open it in a new tab for the full, print-ready version.
