FastRack: String Inverter Mount
Sollega String Inverter Mount Datasheet
The Sollega String Inverter Mount is a quick-to-install, 20°-tilt platform for string inverters, combiner boxes, and disconnects. Built on the FastRack 510-6dg system, it can be ballasted or mechanically attached and inverts within the array.
Sollega String Inverter Mount
Based on the FastRack 510-6dg system, the Sollega String Inverter Mount is a quick-to-install solution that can be ballasted or mechanically attached.
Features
- Invert in the array
- 20° tilt
- Ballast & mechanical attachment options
- Flexible strut configuration
- Mount most string inverters, combiner boxes and disconnects
- Quick to install
Configuration
The string inverter mounts at a 20° tilt with its center of mass placed over the FastRack 510 ballast base. The unit is captured between aluminum rails connected to the FR510 base, allowing inverters, combiner boxes, and disconnects to be supported within the array.
Specifications
| Dimensions (without rails) | 24.25 x 29 x 14" (L x W x H) |
|---|---|
| Weight | 13 lbs. |
| Tilt | 20° |
| Base system | FastRack FR510-6dg |
| Ballast blocks | (4) 32.5 lb. blocks (4 x 8 x 16") per FastRack510 |
| Certifications | PE stamp |
| Attachment options | Ballasted or mechanically attached |
Get the original document
Download the source PDF document or open it in a new tab for the full, print-ready version.
