FastRack FR510
FR510 Mechanical Anchor Detail
Detail drawingPDF document
Engineering detail sheet for mechanically anchoring the FastRack 510-6dg, covering the stainless steel anchor plate geometry, the corner-support hardware stack, and rail-to-FastRack connection views.
FastRack 510-6dg Mechanical Anchor / Rail Details
Mechanical Anchor Detail (8 / S2.0)
| Plate size | 1' x 1' (12" square) |
|---|---|
| Bolt-hole circle | ⌀5 1/8" |
| Material thickness callouts | 1/4", 1/16" |
| Drawing scale | 1-1/2" = 1'-0" |
Anchor plate has filleted (rounded) corners.
Internal corner support running East-West — connection hardware
- 5/16" stainless steel carriage bolt
- Stainless steel square washer
- 5/16" stainless steel serrated flange nut
- 3/8" stainless steel fender washer
- 3/8" stainless steel nylon lock nut
- L-foot
- U-anchor plate with bolt
- FastRack510 corner support cutout (E-W or N-S orientation)
Anchor-to-FastRack connection details — alternate views (6 / S2.0)
- Top — rail / FastRack connection
- Side — rail / FastRack connection
Rail should rest on the interior lip of the FR510.
- Anchor to rail is located on the outside of the FastRack
- Corner support is located to the inside of the FastRack
Get the original document
Download the source PDF document or open it in a new tab for the full, print-ready version.
