FastRack FR510
FR510-6 Datasheet
DatasheetPDF document
Product datasheet for the Sollega FastRack 510-6, a one-piece injection-molded solar racking solution for flat-roof and ground-mount PV installations, offering 5°, 6°, and 10° tilt options with full UL 2703 and UL 3741 certification.
The FastRack 510-6
The FastRack 510-6 is the simple solar racking solution for flat roof and ground mount PV installations. A one-piece, injection-molded design supports 5°, 6°, and 10° tilt configurations and is compatible with all framed modules, with fully ballasted, heat-welded, anchored, and hybrid attachment options.
- 5°, 6°, 10° mounting solution
- Simple, modular, one-piece design
- Universal design compatible with all framed modules
- Fully ballasted, heat welded, anchored and hybrid options
- Roof friendly with round edges and low point loads
- One size bolt with all top-down connections
- Injection molded UV rated Nylon 6
- PE stamp engineering and ballast layout services available
- UL 2703 Class A, Type 1, 2, 3, 29 Modules
- UL 3741 — PV Hazard Control
- 100% Recyclable
- Made in the U.S.A.
Installation in Three Steps
- Position FastRacks
- Add ballast and clamps
- Attach modules
Specifications by Tilt Angle
| Specification | 5° | 6° | 10° |
|---|---|---|---|
| Row Spacing (inter-row) | 10" (254mm) | 8" (203mm) | 13" (330mm) |
| Leading Edge | 8" (203mm) | 8" (203mm) | 5.3" (135mm) |
| Compatible Modules | Rated up to 46" (1168.4mm) in width |
|---|---|
| Weight | 4.5 lbs (2kg) |
| Ballast Requirements | 4" x 8" x 16" Roof Paver (31.5 lbs each) based on ASTM Designation C1491-01a |
| Material | Injection Molded UV rated Nylon 6 |
| Module Orientation | Landscape |
| Wind Load Criteria | Meets ASCE 7-16 up to 165 MPH |
| UL Certification | UL 1703: Class 'A' Type 1,2,3,29 Modules, UL2703, UL3741 |
| Warranty | 25 Year Limited Warranty |
| Dimensions (LxWxH) | 24.25 x 29 x 14" (616 x 737 x 356mm) |
| Disassembly | Simple disassembly and 100% recyclable content |
| Patent | Utility Patent #9,831,817 / Design Patent #D800,055 |
Bolt Location by Tilt
- 5° tilt = 10" inter-row spacing
- 6° tilt = 8" inter-row spacing
- 10° tilt = 13" inter-row spacing
- Compatible accessory: Slide-on Bonding Jumper
- Compatible accessory: Optimizer Mount
- 4 x 8 x 16" ballast paver
Made in the USA. 100% recyclable injection-molded UV-rated Nylon 6 construction.
Get the original document
Download the source PDF document or open it in a new tab for the full, print-ready version.
