Ballast Requirement
Ballast Fitment
Reference drawingPDF document
A reference fitment drawing for the Sollega FastRack 510-6dg, showing how standard concrete ballast blocks seat into the racking base at 5°, 6°, and 10° tilt angles, along with the block quantities and dimensions for each configuration.
Sollega FastRack 510-6dg Ballast Fitment for 5°, 6° & 10°
This drawing illustrates the cross-section fitment of standard concrete ballast blocks within the FastRack 510-6dg base at three tilt angles (5°, 6°, and 10°), using either full-size or half-size blocks. It documents the number of blocks each configuration accommodates and the nominal and actual block dimensions.
| Full block (nominal) | 4" x 8" x 16" |
|---|---|
| Full block (actual) | 3 5/8" x 7 5/8" x 15 5/8" |
| Half block (nominal) | 2" x 8" x 16" |
| Half block (actual) | 1 5/8" x 7 5/8" x 15 5/8" |
| Tilt angle | Full-size blocks | Half-size blocks |
|---|---|---|
| 5° | 5 | 10 |
| 6° | 5 | 11 |
| 10° | 5 | 11 |
FastRack 510-6dg is made in the USA.
Get the original document
Download the source PDF document or open it in a new tab for the full, print-ready version.
